Categories
Best Seller Items
-
WIKA Pressure Guage BSP Bottom (Range: 0 to 30Kg/cm²)
- Measuring Range: 0 to 30 Kg/cm².
- Connection: Bottom BSP 1/2″
-
Material Stainless Steel , Copper Alloy - Heating And Air-Conditioning Technology
- Suitable For Industrial Applications; Heating And Air-Conditioning Technology
- Due to this high variance, the instrument is suitable for use in a wide range of applications within industry.
৳ 1,500.00 -
Pneumatic Nozzle 6mmx1/8″ Pipe Connector – 5 Pcs
Product: Pneumatic nozzle straight connector 6 mm*1/8inch
Male Thread Size: 1/8″BSPT
Pipe size/Fit For Tube Outer Diameter: 6 mm
Fluid Type: Air / Vacuum
Operating Pressure: 0~10.2kgf/cm2 (0~1.0Mpa)
Negative Pressure: -750mmhg (10 Torr)
Operating Temperature Range: 0~60 C
Fit For Tube Material: PU / Nylon ,Polyurethane
Fitting Material: Metal & Plastic
Push in fitting
৳ 150.00 -
AIRTAC 4V210-08 SINGLE SOLENOID VALVE – AC 220V
- MODEL ; 4V210-08 ( AC 220V )
- – WORKING FLUID ; AIR
- – OPERATING ; INTERNALLY PILOTE
- – TYPE ; 5 PORT 2 POSITION
- – PORT SIZE ; 1/4″ ( 13mm )
- – PRESSURE RANGE ; 1.5 ~ 8 BAR ( 1.5 Kgf / cm3 )
- – PROOF PRESSURE ; 12 BAR ( 12 Kgf / cm3 )
- – VOLTAGE ; AC 220V
- – PROTECTION ; IP65 ( DIN40050 )
- – DIMENSIONS ; L 11.6 x W 2.2 x H 3.5 CM
- – WEIGHT ; 0.22 KGMAINTENANCE NOTICE:
- 1. BE SURE TO CHECK UP THE VALVE BEFORE USING.
- 2. PLEASE PAY ATTENTION TO THE DIRECTION OF FLOW AND CONNECTION WHEN
- INSTALLING.
- 3. PLEASE CONFIRM THE VOLTAGE TO BE IN THE PERMISSIVE RANGE WHEN
- INSTALLING. WHEN THE COMPLETE MACHINE IS TESTED IT IS PREFERABLE TO USE
- HAND GEAR TO DEBUG FIRST, AND THEN BY ELECTRICITY.
- 4. NOTICE TO BE DUST PROOF. TO INSTALL A SILENCER OR SPEED CONTROL SILENCER
- IN FRONT OF SOLENOID VALVE WHERE IS PREFERABLE.
- 5. NOTICE NOT TO WIND LEAK PRESENTING STRIP BEYOND HELICON AND OCEAN
- UP METAL GRAIN, DUSTANDOIL STAIN IN PIPES AND FITTINGS WHEN CONNECTING.
৳ 500.00 -
Pneumatic Nozzle 6mmx1/4″ Pipe Connector – 5 Pcs
Product: Pneumatic nozzle straight connector 6 mm*1/4inch
Male Thread Size: 1/4″BSPT
Pipe size/Fit For Tube Outer Diameter: 6 mm
Fluid Type: Air / Vacuum
Operating Pressure: 0~10.2kgf/cm2 (0~1.0Mpa)
Negative Pressure: -750mmhg (10 Torr)
Operating Temperature Range: 0~60 C
Fit For Tube Material: PU / Nylon ,Polyurethane
Fitting Material: Metal & Plastic
Push in fitting
৳ 150.00 -
PNEUMATIC 1/4″NPT Solenoid Valve
- Type: 5 Ways 2 Positions
- Inlet = Outlet = 1/4″NPT; Exhaust = 1/8″NPT
- CV value: 0.78
- Pressure:25-116PSI
- Voltage: 24V
- Operation Type:Internally Piloted Acting Type
- Position & Way Number: Two-Position, Five-Way
- 1 × (Solenoid Valve)
- 1 × Teflon Tape
- 3 × PC6-02
- 2 × Pneumatic Muffler SL-01
৳ 1,250.00PNEUMATIC 1/4″NPT Solenoid Valve
৳ 1,250.00 -
Pneumatic Regulator (AR2000-02) 1/4″
Model: AR2000-02
Material: Aluminum Alloy + PC
Gauge and fitting included: yes
Connection Thread/port size: 1/4 inch
Gauge port size: 1/8 inch
Environmental Temperature: 5~60℃
Operating pressure range: 0.05-0.85 MPa.
Gauge Diameter: approx. 4.1cm / 1.61in
৳ 700.00Pneumatic Regulator (AR2000-02) 1/4″
৳ 700.00 -
SNS 1/4X5 Way SOLENOID VALVE – DC24
Brand: SNS
Power: DC24V
1/4″X5 Way NPT Inlet
Single Coil Pilot-Operated Electric Solenoid Valve
৳ 950.00৳ 1,000.00SNS 1/4X5 Way SOLENOID VALVE – DC24
৳ 950.00৳ 1,000.00
Recommended Items
-
-
Pneumatic Pipe Roll 10 mm Blue 100 meter
Product: Pneumatic pipe roll
Made In Korea
Pipe size: 10 mm
Color: blue
Length: 100 meters (328 feet)
Outer Diameter OD: 10 mm
Inner Diameter ID: 8 mm
Heat resistant: -40 C to + 80 C
Material: polyurethane (PU)
Working factor: air, water, oil, etc.
- Burst Pressure:18~32 bar
৳ 2,600.00Pneumatic Pipe Roll 10 mm Blue 100 meter
৳ 2,600.00 -
Pneumatic Socket Straight Equal 6mm x 6mm- 5 PCS
Product: Pneumatic 6mm Pipe socket two way equal tube
Temperature range: 0-60 C
Size: 10mm*10mm
Working medium: air, vacuum
Operating pressure: 0~10.2kgf/cm2(0~1.0MPa)
Maximum pressure: 15.3kgf/cm2(1.5MPa)
Manufactured: china
৳ 150.00 -
Siemens LFL1.335 Burner Control Box
- Siemens LFL1.335A27 controls gas, oil or duel fuel burners.
- Supply Voltage: 230V
- Pre-purge time with air damper open: 37s
- Pre-ignition time: 5s
- Pre-ignition time(long): 2.5s
- Post purge time: 15s
- Ignition safety time: 2.5s
- Duration of startup sequence: 74s
Following model of Thermax Boiler Sequence Controller available in stock.
- Siemens Burner Controller LOA 24
- Siemens Burner Controller LOA 44
- Siemens Burner Controller LAL 1.25
- Siemens Burner Controller LAL 1.333
- Siemens Burner Controller LAL 2.25
- Siemens Burner Controller LAL 2.65
- Siemens Burner Controller LAL 3.25
- Siemens Burner Controller LMO 44
- Siemens Burner Controller LOK 16
- Siemens Burner Controller LFL 1.322
- Siemens Burner Controller LFL 1.333
- Siemens Burner Controller LFL 1.635
- Siemens Burner Controller LME 21
- Siemens Burner Controller LME 22
- Siemens Burner Controller LME 25
- Siemens Burner Controller LMG 21
- Siemens Burner Controller LGB 21
- Siemens Burner Controller LGB 22
- Siemens Burner Controller LMG 21
- Siemens Burner Controller LMG 22
- Siemens Burner Controller LME 11
- Siemens Burner Controller LFL 1.335
৳ 40,000.00Siemens LFL1.335 Burner Control Box
৳ 40,000.00 -
fuel injection gear pump PFP 450
Model PFP-450
Range 1/2” X ½” = 0.25-2.0HP
৳ 12,500.00fuel injection gear pump PFP 450
৳ 12,500.00 -
AUTOMATIC BURNER CONTROLLER IFS 258-10W
Automatic burner control units IFS 258
•Flame control with ionisation sensor or UV sensor
•Ignition and monitoring with a single electrode
•Long sensor cables possible
•Cut-off threshold for flame current variable
•Measuring sockets for uninterrupted flame current measurement
•Restart or immediate fault lock-out following flame failure, switchable
•Signal contacts for operation and faults
•EC type-tested and certified
•CE
Application
The automatic burner control units ignite and monitor gas burners in intermittent operation, i.e. the burners must be shut down once in every 24 hours.
They are used in directly ignited gas burners of any capacity (ignition power≤ 350 kW) in which, for technical reasons, pre- purging is omitted or controlled by a separate control system. Typical areas of application are industrial thermal process systems to EN 746 in the iron, steel, glass, ceramics, plastics processing and chemical industries. In addition, the IFS 258 are also suitable for use with atmospheric burners in other heat-generating systems.
The units are type-tested and certified in accordance with EC Directive 90/396/EEC for gas appliances in conjunction with EN 298.
৳ 25,000.00AUTOMATIC BURNER CONTROLLER IFS 258-10W
৳ 25,000.00 -
METAL WORK PNEUMATIC 24VDC, 2W, Coil, 22MM
- 22MM
- 24VDC
- 2W
- 91MA
- COIL
৳ 1,500.00METAL WORK PNEUMATIC 24VDC, 2W, Coil, 22MM
৳ 1,500.00