Categories
Best Seller Items
-
Vacuum Pressure Gauge 1/4″ Npt Lower Mount -76
- This gauge can be used to measure air, water, oil, gas, and anything else that is not corrosive to brass.
- This -30 inhg -760 mmhg air compressor hydraulic pressure gauge features a 2 inches face
- Dia: 2.5″
- This is a chrome steel gauge with chrome steel bezel.
- Pressie scale with one pointer.
- A pressure meter is an instrument used to measure the pressure of gases or liquids in a container and usually helps to ensure the optimum pressure for a given application.
৳ 950.00৳ 1,050.00CompareVacuum Pressure Gauge 1/4″ Npt Lower Mount -76
৳ 950.00৳ 1,050.00 -
AIRTAC 4V210-08 SINGLE SOLENOID VALVE – AC 220V
- MODEL ; 4V210-08 ( AC 220V )
- – WORKING FLUID ; AIR
- – OPERATING ; INTERNALLY PILOTE
- – TYPE ; 5 PORT 2 POSITION
- – PORT SIZE ; 1/4″ ( 13mm )
- – PRESSURE RANGE ; 1.5 ~ 8 BAR ( 1.5 Kgf / cm3 )
- – PROOF PRESSURE ; 12 BAR ( 12 Kgf / cm3 )
- – VOLTAGE ; AC 220V
- – PROTECTION ; IP65 ( DIN40050 )
- – DIMENSIONS ; L 11.6 x W 2.2 x H 3.5 CM
- – WEIGHT ; 0.22 KGMAINTENANCE NOTICE:
- 1. BE SURE TO CHECK UP THE VALVE BEFORE USING.
- 2. PLEASE PAY ATTENTION TO THE DIRECTION OF FLOW AND CONNECTION WHEN
- INSTALLING.
- 3. PLEASE CONFIRM THE VOLTAGE TO BE IN THE PERMISSIVE RANGE WHEN
- INSTALLING. WHEN THE COMPLETE MACHINE IS TESTED IT IS PREFERABLE TO USE
- HAND GEAR TO DEBUG FIRST, AND THEN BY ELECTRICITY.
- 4. NOTICE TO BE DUST PROOF. TO INSTALL A SILENCER OR SPEED CONTROL SILENCER
- IN FRONT OF SOLENOID VALVE WHERE IS PREFERABLE.
- 5. NOTICE NOT TO WIND LEAK PRESENTING STRIP BEYOND HELICON AND OCEAN
- UP METAL GRAIN, DUSTANDOIL STAIN IN PIPES AND FITTINGS WHEN CONNECTING.
৳ 500.00৳ 750.00CompareAIRTAC 4V210-08 SINGLE SOLENOID VALVE – AC 220V
৳ 500.00৳ 750.00 -
Bronze Gate Valve 1 1/2″ Heavy Body
Max Pressure: 32 Bar
Working Temp: -10°C to +200°C
Screwed BSP Taper (ISO 7/1)
Bronze Body
Union Bonnet
Rising Stem
PTFE Renewable Disc
৳ 1,200.00৳ 1,350.00CompareBronze Gate Valve 1 1/2″ Heavy Body
৳ 1,200.00৳ 1,350.00 -
Pneumatic Nozzle 6mmx1/8″ Pipe Connector – 5 Pcs
Product: Pneumatic nozzle straight connector 6 mm*1/8inch
Male Thread Size: 1/8″BSPT
Pipe size/Fit For Tube Outer Diameter: 6 mm
Fluid Type: Air / Vacuum
Operating Pressure: 0~10.2kgf/cm2 (0~1.0Mpa)
Negative Pressure: -750mmhg (10 Torr)
Operating Temperature Range: 0~60 C
Fit For Tube Material: PU / Nylon ,Polyurethane
Fitting Material: Metal & Plastic
Push in fitting
৳ 150.00৳ 200.00ComparePneumatic Nozzle 6mmx1/8″ Pipe Connector – 5 Pcs
৳ 150.00৳ 200.00 -
WIKA Pressure Guage BSP Bottom (Range: 0 to 30Kg/cm²)
- Measuring Range: 0 to 30 Kg/cm².
- Connection: Bottom BSP 1/2″
-
Material Stainless Steel , Copper Alloy - Heating And Air-Conditioning Technology
- Suitable For Industrial Applications; Heating And Air-Conditioning Technology
- Due to this high variance, the instrument is suitable for use in a wide range of applications within industry.
৳ 1,500.00৳ 1,650.00CompareWIKA Pressure Guage BSP Bottom (Range: 0 to 30Kg/cm²)
৳ 1,500.00৳ 1,650.00 -
Pneumatic Regulator Filter FRL 1/4″ X 2 part
Port input and output size: 1/4″ inch
Gauge port size: 1/8″ inch
Gauge included: yes
Material : Metal, Plastic
Working Medium : Air
Max. Pressure : 1 Mpa
Max Temp. : 60C(140F)
Adjustable Pressure Range : 0.05-0.85Mpa
Pressure Gauge Range : 0 – 1 MPa
৳ 1,250.00৳ 1,750.00ComparePneumatic Regulator Filter FRL 1/4″ X 2 part
৳ 1,250.00৳ 1,750.00 -
Pneumatic Nozzle 6mmx1/4″ Pipe Connector – 5 Pcs
Product: Pneumatic nozzle straight connector 6 mm*1/4inch
Male Thread Size: 1/4″BSPT
Pipe size/Fit For Tube Outer Diameter: 6 mm
Fluid Type: Air / Vacuum
Operating Pressure: 0~10.2kgf/cm2 (0~1.0Mpa)
Negative Pressure: -750mmhg (10 Torr)
Operating Temperature Range: 0~60 C
Fit For Tube Material: PU / Nylon ,Polyurethane
Fitting Material: Metal & Plastic
Push in fitting
৳ 160.00৳ 200.00ComparePneumatic Nozzle 6mmx1/4″ Pipe Connector – 5 Pcs
৳ 160.00৳ 200.00
Recommended Items
-
UNI-D Solenoid Valve 2″
Model: UW-50Made: UNI-DWorking medium : air,water,oil,gas
Motion Pattern : Direct Drive Type
Type : Normal Close Type / Normal Open Type
Aperture of Flow Rate : 20mm.
Joint Pipe Bore : 2″
Operation Fluid Viscosity : below 20 CSTWorking Pressure : Water/Oil :0~5 kgf/cm2 , Air /Gas:0~7 kgf/cm2Max.Pressure Resistance : 10.5 kgf/cm2Operating Temperature Range : -5~100℃Voltage: AC220VVoltage Range : 10%Material of Body : BrassMaterial of Oil Seal : NBR , EPDM , VITON৳ 8,200.00৳ 8,500.00CompareUNI-D Solenoid Valve 2″
৳ 8,200.00৳ 8,500.00 -
Pneumatic Tee 8mm x 8mm x 8mm -5 Pcs
Product: Pneumatic Tee for 8 mm pneumatic pipe
Type: air hose fitting
Connection: push fit/Push to connect
Shape of fitting: Tee shape
Size: 6mm (all 3 sides)
Fluid Admitted: Air, Vacuum
Working Pressure: 0-1.0MPa/0-150psi
Proof Pressure: 120psi.
Seal O-ring: NBR
Lock Claw: Stainless Steel (SUS)
Body: Plastic
Operating Temperature: -20~80℃
Negative Pressure: -100Kpa
৳ 160.00৳ 220.00ComparePneumatic Tee 8mm x 8mm x 8mm -5 Pcs
৳ 160.00৳ 220.00 -
Siemens LME22.331C2 Burner Control Box
- Siemens LME22.331 C2 Controls 2 stage burners with actuator control
- Supply Voltage: 240V
- Waiting time: 2.5s
- Prepurge time: 30s
- Safety time: 3s
- Preignition time: 2s
- Specified time for air pressure signal: 3s
- Interval between ignition «Off» and «BV2»: 8s
- Programmed opening time for actuator «SA»: 12s
- Programmed closing time for actuator «SA»: 12s
Following model of Thermax Boiler Sequence Controller available in stock.
- Siemens Burner Controller LOA 24
- Siemens Burner Controller LOA 44
- Siemens Burner Controller LAL 1.25
- Siemens Burner Controller LAL 1.333
- Siemens Burner Controller LAL 2.25
- Siemens Burner Controller LAL 2.65
- Siemens Burner Controller LAL 3.25
- Siemens Burner Controller LMO 44
- Siemens Burner Controller LOK 16
- Siemens Burner Controller LFL 1.322
- Siemens Burner Controller LFL 1.333
- Siemens Burner Controller LFL 1.635
- Siemens Burner Controller LME 21
- Siemens Burner Controller LME 22
- Siemens Burner Controller LME 25
- Siemens Burner Controller LMG 21
- Siemens Burner Controller LGB 21
- Siemens Burner Controller LGB 22
- Siemens Burner Controller LMG 21
- Siemens Burner Controller LMG 22
- Siemens Burner Controller LME 11
- Siemens Burner Controller LFL 1.335
৳ 15,500.00৳ 16,500.00CompareSiemens LME22.331C2 Burner Control Box
৳ 15,500.00৳ 16,500.00 -
Fida Boiler Transformer
1 Pole ignition, low power consumption.
Same mounting dimensions as the EBI series for extra flexibility.
Replacement part for Ecoflam MAX oil burners.
৳ 4,200.00CompareFida Boiler Transformer
৳ 4,200.00 -
Siemens SQN30.402A1700 Servo Motor
Specifications
The SQN30.402A1700 actuators are designed for driving gas or air dampers of oil or gas burners of small to medium capacity, or for load-dependent control of the fuel or combustion air volume. Features include a impact-proof and heat-resistant plastic housing, a maintenance-free gear train, which can be disengaged, and easy-to-adjust end and auxiliary switches for setting the switching points.
Technical Data:
Holding Torque: 3Nm
Operating Torque: 3Nm
Running Time: 30s
Direction of Rotation: Clockwise
Mains voltage: AC 100 V –15 %…AC 120 V +10 %
Degree of protection: IP 40
Weight: 800g
Number of End Switches: 2
৳ 41,500.00৳ 45,000.00CompareSiemens SQN30.402A1700 Servo Motor
৳ 41,500.00৳ 45,000.00 -
Stainless Steel Foot Valve DN150
Material:Stainless Steel, cast iron
Pressure:Low Pressure,medium pressure
Media:Acid
Structure:bottom
Nominal pressure:10k
Strength pressure test:2.1MPa
Power:Hydraulic
Port Size: 6 Inch
Nominal diameter:DN150
Suitable temperature:≤150
Suitable medium:water, oil,acid
Seal pressure test:1.6MPa
৳ 14,000.00CompareStainless Steel Foot Valve DN150
৳ 14,000.00 -
kromschroder gas pressure regulator VGBF 50F40-3
- P max = 4bar
- Wa : 150-300mbar
- Pas : 20mbar
- Size : 32,5mm/DN40
- Brand : Krom//schroder
৳ 73,000.00৳ 75,000.00Comparekromschroder gas pressure regulator VGBF 50F40-3
৳ 73,000.00৳ 75,000.00