Categories
Best Seller Items
-
Vacuum Pressure Gauge 1/4″ Npt Lower Mount -76
- This gauge can be used to measure air, water, oil, gas, and anything else that is not corrosive to brass.
- This -30 inhg -760 mmhg air compressor hydraulic pressure gauge features a 2 inches face
- Dia: 2.5″
- This is a chrome steel gauge with chrome steel bezel.
- Pressie scale with one pointer.
- A pressure meter is an instrument used to measure the pressure of gases or liquids in a container and usually helps to ensure the optimum pressure for a given application.
৳ 950.00৳ 1,050.00CompareVacuum Pressure Gauge 1/4″ Npt Lower Mount -76
৳ 950.00৳ 1,050.00 -
AIRTAC 4V210-08 SINGLE SOLENOID VALVE – AC 220V
- MODEL ; 4V210-08 ( AC 220V )
- – WORKING FLUID ; AIR
- – OPERATING ; INTERNALLY PILOTE
- – TYPE ; 5 PORT 2 POSITION
- – PORT SIZE ; 1/4″ ( 13mm )
- – PRESSURE RANGE ; 1.5 ~ 8 BAR ( 1.5 Kgf / cm3 )
- – PROOF PRESSURE ; 12 BAR ( 12 Kgf / cm3 )
- – VOLTAGE ; AC 220V
- – PROTECTION ; IP65 ( DIN40050 )
- – DIMENSIONS ; L 11.6 x W 2.2 x H 3.5 CM
- – WEIGHT ; 0.22 KGMAINTENANCE NOTICE:
- 1. BE SURE TO CHECK UP THE VALVE BEFORE USING.
- 2. PLEASE PAY ATTENTION TO THE DIRECTION OF FLOW AND CONNECTION WHEN
- INSTALLING.
- 3. PLEASE CONFIRM THE VOLTAGE TO BE IN THE PERMISSIVE RANGE WHEN
- INSTALLING. WHEN THE COMPLETE MACHINE IS TESTED IT IS PREFERABLE TO USE
- HAND GEAR TO DEBUG FIRST, AND THEN BY ELECTRICITY.
- 4. NOTICE TO BE DUST PROOF. TO INSTALL A SILENCER OR SPEED CONTROL SILENCER
- IN FRONT OF SOLENOID VALVE WHERE IS PREFERABLE.
- 5. NOTICE NOT TO WIND LEAK PRESENTING STRIP BEYOND HELICON AND OCEAN
- UP METAL GRAIN, DUSTANDOIL STAIN IN PIPES AND FITTINGS WHEN CONNECTING.
৳ 500.00৳ 750.00CompareAIRTAC 4V210-08 SINGLE SOLENOID VALVE – AC 220V
৳ 500.00৳ 750.00 -
Bronze Gate Valve 1 1/2″ Heavy Body
Max Pressure: 32 Bar
Working Temp: -10°C to +200°C
Screwed BSP Taper (ISO 7/1)
Bronze Body
Union Bonnet
Rising Stem
PTFE Renewable Disc
৳ 1,200.00৳ 1,350.00CompareBronze Gate Valve 1 1/2″ Heavy Body
৳ 1,200.00৳ 1,350.00 -
WIKA Pressure Guage BSP Bottom (Range: 0 to 30Kg/cm²)
- Measuring Range: 0 to 30 Kg/cm².
- Connection: Bottom BSP 1/2″
-
Material Stainless Steel , Copper Alloy - Heating And Air-Conditioning Technology
- Suitable For Industrial Applications; Heating And Air-Conditioning Technology
- Due to this high variance, the instrument is suitable for use in a wide range of applications within industry.
৳ 1,500.00৳ 1,650.00CompareWIKA Pressure Guage BSP Bottom (Range: 0 to 30Kg/cm²)
৳ 1,500.00৳ 1,650.00 -
Pneumatic Nozzle 6mmx1/8″ Pipe Connector – 5 Pcs
Product: Pneumatic nozzle straight connector 6 mm*1/8inch
Male Thread Size: 1/8″BSPT
Pipe size/Fit For Tube Outer Diameter: 6 mm
Fluid Type: Air / Vacuum
Operating Pressure: 0~10.2kgf/cm2 (0~1.0Mpa)
Negative Pressure: -750mmhg (10 Torr)
Operating Temperature Range: 0~60 C
Fit For Tube Material: PU / Nylon ,Polyurethane
Fitting Material: Metal & Plastic
Push in fitting
৳ 150.00৳ 200.00ComparePneumatic Nozzle 6mmx1/8″ Pipe Connector – 5 Pcs
৳ 150.00৳ 200.00 -
Electrical Pneumatic Solenoid Valve Coil 220V AC
Electrical Pneumatic Solenoid Valve Coil 220V AC
- Product Name : Solenoid Valve Coil | Voltage : AC 220V
- Hex Connector Inner Dia(Approx) : 11mm / 0.4″ | Size(Approx) : 60 x 45 x 20mm / 2.4″ x 1.8″ x 0.8″(L*W*H)
- Fixing Hole Diameter : 8mm / 0.3″ | Material : Plastic, Electrical Part
- Main Color : Black | Net Weight : 69g
- Package Content : 1 x Solenoid Valve Coil
৳ 450.00৳ 550.00CompareElectrical Pneumatic Solenoid Valve Coil 220V AC
৳ 450.00৳ 550.00 -
Manual Hydraulic Pipeline Water Pressure Test Pump 50 BAR
Features:
- Made of high quality iron material, surface paint spray treatment, rustproof and durable.
- Pointer type pressure gauge with clear scales for easy reading.
- Long operation handle makes great leverage for saving effort and reducing hand fatigue.
- Suitable for pressure testing of a variety of pressure vessels, pipes, valves, rubber fittings.
- Widely used in chemical industry, construction, plumbing, oil, coal, metallurgy, shipbuilding and other industries.
Specification:
Item Type: Manual Pressure Test Pump
Maximum Testing Pressure: 1000PSI / 7MPa
Instructions:
- Install the machine and secure the pump body to the water tank with four screws.
- Install the water pipe and connect it to the pump body (Note: seal connection, add washer, you can also use Teflon tape, otherwise it is easy to leak)
- Connect the other end of the outlet hose to the tested pipe
- Fill the test tube with water, vent the air, and then close the pressure relief valve.
- Fill the water tank with water, then rock the handle up and down to start the pressure test.
- When the pressure gauge rises to the required pressure, the pressure can be stopped (normal tap water pressure is 0.3Mpa, high-rise residential building water pressure is 0.4Mpa, water pipe pressure test is generally pressurized to 0.8-1Mpa, 0.1Mpa is equivalent to 1kg pressure)
- After stopping the back pressure, if the indicated pressure does not drop, it can be proved that the pressure resistance of the pipe is good. On the contrary, it can be proved that the sealing performance of the sealed tube was not good, and there exists a leakage that has caused a pressure drop.
Package List:
1 x Pump
1 x Handle
1 x Water Pipe
9 x Seal Ring
1 x User Manual
৳ 8,000.00৳ 8,500.00CompareManual Hydraulic Pipeline Water Pressure Test Pump 50 BAR
৳ 8,000.00৳ 8,500.00
Recommended Items
-
FESTO VUVG-LK10-M52-AT-M5-1H2L-S solenoid valve
-
Brand : Festo
-
Suitable Media : Air
-
MPN : VUVG-LK10-M52-AT-M5-1H2L-S
-
Valve Operation : Air-Operated
-
Country/Region of Manufacture : Germany
৳ 6,300.00৳ 7,500.00CompareFESTO VUVG-LK10-M52-AT-M5-1H2L-S solenoid valve
৳ 6,300.00৳ 7,500.00 -
-
Pneumatic Cylinder 25 x 100mm PMI
Cylinder size: pitch 100mm, hole 25mm.
Bar type: single bar
Type of action: double-acting
Fluid: air
Screw hole diameter: 1/8 “PT (8.8 MM)
Rod thread diameter: 10mm / 0.39″
Max. Press: 1.0 mpa
Main material: alloy
Condition: 100% new
৳ 1,650.00৳ 2,000.00ComparePneumatic Cylinder 25 x 100mm PMI
৳ 1,650.00৳ 2,000.00 -
WIKA Pressure Guage BSP Bottom (Range: 0 to 30Kg/cm²)
- Measuring Range: 0 to 30 Kg/cm².
- Connection: Bottom BSP 1/2″
-
Material Stainless Steel , Copper Alloy - Heating And Air-Conditioning Technology
- Suitable For Industrial Applications; Heating And Air-Conditioning Technology
- Due to this high variance, the instrument is suitable for use in a wide range of applications within industry.
৳ 1,500.00৳ 1,650.00CompareWIKA Pressure Guage BSP Bottom (Range: 0 to 30Kg/cm²)
৳ 1,500.00৳ 1,650.00 -
Siemens SQN31.401A2700 Servo Motor
Specifications
The SQN31.401A2700 actuators are designed for driving gas or air dampers of oil or gas burners of small to medium capacity, or for load-dependent control of the fuel or combustion air volume. Features include a impact-proof and heat-resistant plastic housing, a maintenance-free gear train, which can be disengaged, and easy-to-adjust end and auxiliary switches for setting the switching points.
Technical Data:
Holding Torque: 3Nm
Operating Torque: 3Nm
Running Time: 30s
Direction of Rotation: Clockwise
Mains voltage: AC 220 V –15 %…AC 240 V +10 %
Degree of protection: IP 40
Weight: 800g
Number of End Switches: 2
Alternative Part Number: SQN 31.401 A2700
৳ 42,000.00৳ 45,000.00CompareSiemens SQN31.401A2700 Servo Motor
৳ 42,000.00৳ 45,000.00 -
Bronze Gate Valve 2″ Heavy Body
Max Pressure: 32 Bar
Working Temp: -10°C to +200°C
Screwed BSP Taper (ISO 7/1)
Bronze Body
Union Bonnet
Rising Stem
PTFE Renewable Disc
৳ 1,800.00CompareBronze Gate Valve 2″ Heavy Body
৳ 1,800.00 -
MADAS GAS REGULATOR – DN20-OUTLET 40-110 MBAR
GAS REGULATOR
SIZE: 3/4 INCH( DN20)
INLET PRESSURE : 2 BAR
OUTLET PRESSURE : 40-110 MBAR
BRAND: MADAS
MADE IN ITALY
৳ 7,000.00৳ 7,600.00CompareMADAS GAS REGULATOR – DN20-OUTLET 40-110 MBAR
৳ 7,000.00৳ 7,600.00 -
SMC Cylinder CDJ2B16-25Z-B
SMC Cylinder CDJ2B16-25Z-B Supplier in Bangladesh
Call: 01911-737766 For Price
Delivery Time 21 Days After Order
Made In China
৳ 3,000.00CompareSMC Cylinder CDJ2B16-25Z-B
৳ 3,000.00