• SUNTEC PUMP

    The SUNTEC J oil pump incorporates a pressure regulating valve with (or without) cut-off function.

     

    APPLICATIONS

    – Light and medium oil.
    – One or two-pipe system
    – Normally associated with in-line solenoid valve

     

    PUMP OPERATING PRINCIPLE

    The gear set draws oil from the tank through the built-in filter and transfers it to the valve that regulates the oil pressure to the nozzle line.

    All oil that does not go through the nozzle line will be dumped through the valve back to the return line in two pipe installation or, if it is a one-pipe installation, back to the suction port in the gear-set. In that case, the by-pass plug must be removed from the return port and the return port sealed by steel plug and washer

    During starting period when the gear-set speed is increasing, all the oil passes through a special flat on the piston, back to the return. Once the speed reaches a certain value and the flow can no longer pass through this flat, then the pressure increases rapidly overcoming the valve spring force and opens the valve.

    ৳ 19,500.00

    SUNTEC PUMP

    ৳ 19,500.00
  • Oil Burner Nozzle

    Replacement Nozzle For Oil Burners

    ৳ 1,250.00

    Oil Burner Nozzle

    ৳ 1,250.00
  • Fida Boiler Transformer

    1 Pole ignition, low power consumption.

    Same mounting dimensions as the EBI series for extra flexibility.

    Replacement part for Ecoflam MAX oil burners.

    ৳ 4,200.00
  • Siemens SKP15.000E1 Gas Valve Actuator

    The SKP15.000E1 together with VGx valves works exclusively as a safety shutoff valve (Open / Closed). They are used primarily on gas fired combustion plant. The actuators open slowly and close rapidly. A valve stroke indication at actuator can only be delivered with end switch.

    Technical Data:

    Mains voltage: AC 110 V –15 %…AC 120 V +10 %

    Mains frequency: 50…60 Hz ±6 %

    Degree of protection: IP 54

    Weight: 2.3 kg

    Opening time for full stroke: 6…10 s

    Opening speed: (approx. 2 mm / s) lower opening speeds due to low ambient temperatures can be compensated by fitting an AGA63.5A27 heating element.

    ৳ 65,000.00
  • Kromschroder DG500U-3 Pressure Switch 100-500mBar

    • Certified for systems up to SIL 3 and PL e
    • Suitable for biologically produced methane (can be used on pipes with Zone 2 explosive atmospheres without isolating amplifier)
    • With approved isolating amplifier for Zone 1 and 2 hazardous areas
    • EU certified pursuant to EN 1854 and class “S”
    • RoHS 2002/95/EC and follow-up directive 2011/65/EC
    ৳ 4,200.00
  • Honeywell L404F1078 Pressuretrol 5 to 50 PSI

    • Use with steam, air, noncombustible gases, or fluids non-corrosive to pressure sensing element
    • Models have snap-acting switching to open or close a circuit on pressure rise
    • Have adjustable differentials
    • Adjustments are made by screws on top of case
    • Mount using 1/4 inch -18 NPT internal pipe threads or surface mount through base of case
    ৳ 2,800.00
  • Kromschroder DG6U-3 Pressure Switch

    This Kromschroder DG6U Pressure switch is for the monitoring of gas and air pressures (positive, negative and differential pressures). It features an internal lock and a manual reset.

    The DG gas pressure switch monitors extremely low pressure changes and triggers a set function (swtich-on, switch-off, or switch-over) once a set switching point is reached. The switching point is adjustable using a hand wheel located on the front of the switch.

    Features:

     

    • Certified for systems up to SIL 3 and PL e
    • Suitable for biologically produced methane (can be used on pipes with Zone 2 explosive atmospheres without isolating amplifier)
    • With approved isolating amplifier for Zone 1 and 2 hazardous areas
    • EU certified pursuant to EN 1854 and class “S”
    • RoHS 2002/95/EC and follow-up directive 2011/65/EC
    ৳ 4,500.00
  • Pressure switch KP15 (auto/man) 060-126491 (20-35 / 8-32 bar)

    Type: KP15, Contact function: SPDT+SPST(NO),

    Pressure connection size: 1/4,

    Pressure connection type: Flare,

    Pressure Male/Female: Male

    ৳ 5,000.00৳ 5,500.00
  • Danfoss Pressure Switch 7 bar

    Type: KPI36

    Reset function: Auto

    Regulation range [bar] Pe: 4.00 – 12.00

    Regulation range [psig] Pe: 58.00 – 174.00

    Pressure connection size: 1/4

    Pressure connection type: G

    Pressure Male/Female: Male

    ৳ 1,700.00
  • Dungs LGW10 A4 1-10 mbar Differential Pressure Switch

    • The differential pressure switch LGW10 A4 is an adjustable differential pressure switch as per EN 1854 for automatic burner controls.
    • It is suitable for switching a circuit on, off or over on changes in actual pressure value relative to the set reference value.
    ৳ 4,100.00
  • Dungs LGW3 A4 0.4-3 mbar Differential Pressure Switch

    • The differential pressure switch LGW A4 is an adjustable differential pressure switch as per EN 1854 for automatic burner controls.
    • It is suitable for switching a circuit on, off or over on changes in actual pressure value relative to the set reference value.
    ৳ 4,100.00
  • Dungs GW10 A5 Pressure Switch

    • Max Operating Pressure: 10mbar.
    • Ambient Temperature: -15 °C to +70 °C.
    • IP54 as per EN60529 (IEC 529).
    • Sturdy die-cast aluminum housing.
    • O ring flange connection.
    ৳ 4,000.00

Main Menu